Crowing An Oboe Reed

by Nov 16, 20110 comments

Well, you might think that all there is to crowing an oboe reed is to put it in your mouth and blow hard. In essence that is correct, but did you know that 99% of the information you need to make a good reed is in the crow?

That being said, I can hear you asking, “What is a good crow, and what should I be listening for?”

The answer to the first part is simple.

2 octave “C’s”. No other pitches or noises. Some people prefer 3 octave “C’s”. The main point is that the crow is clean and not flat.

For me, there are two crow tests that I find useful. The first one is to put the oboe reed in my mouth past the thread, and blow very lightly. You should hear the first octave “C” come in.

When you do, increase your air a bit and let the second octave come in. Blow a bit more, and maybe a third octave will sound.

If you hear any other noises or pitches sounding, you must adjust the reed. Always start by making sure the crow is up to pitch.

One other way to see if the pitch crow is fine, is to put the reed in your mouth in a playing position. Tongue the reed and listen for the crow. If the reed is flat, this crow will be lower than a “C”. Clip the reed until the crow reaches C in this position.

If the reed is a bit hard afterward, adjust it. Be aware that this might raise the thread crow to around a “C#”. Not a big problem. Many of my best reeds crow that.

Learn to listen to the crow for your information. Your reeds will improve dramatically.

Read MoreĀ 

The Curtis Factor-A Wonderful Story

The Curtis Factor-A Wonderful Story

  Go check out this article on www.visitphilly.com. It is all about the Curtis Institute and I found it very interesting. Have a look. Image via Wikipedia

Balancing an Oboe Reed

Balancing an oboe reed can be difficult, especially if you are not that experienced at it. There are some things that can help however. The first step in balancing a reed is to make sure the crow is up to a "C". If it isn't, clip the reed. I prefer using single edged...

Oboe Reed Pictures

  They say that you can't really tell much about a reed by the way it looks. I think that is true, however looks do play a small part in how the reed functions. The most important thing when looking at a reed is symmetry. Both blades must look the same. If your...

Oboe Reed Tips

Well, first off, sorry for the play on words here, but what the heck. Here are some reed tips, or "Tips to help you make better oboe reeds." This is the section of the site which will be updated every week. Remember that by subscribing to the Making Oboe Reeds...

Leave a comment.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *